The Kiss seat should fit most bikes that have a 'conventional' style frame with a regular seat tube on the frame. They also produce alternative optional support arms (sold seperately) to deal with frames where the seat sits too high/low, or tips too far back/forward. The seat is designed to be pretty universal, but it is impossible to guarantee it will fit every frame. Looking at the Specialized Sirrus, I believe it will more than likely fit ok though.

Best answer

answered 1 year ago

FisherOutdoorLeisure

0points

0out of 0found this answer helpful.

Question

Will this seat fit on a Dawes Sonoran Ladies 18" frame?

I was told in a shop that there may not be enough room on the frame to fit the attachment required to hold this type of seat. Thanks

asked 8 months ago

Anonymous

on Hamax Kiss Child Seat

-1point

0out of 1found this question helpful.

2 answers

Answers

answer 1

I have checked the geometry of this frame and I would not advise fitting a rear-mounted childseat on this bike.
Looking at a front-mounted seat such as the Hamax Discovery might be a better option.

Best answer

answered 8 months ago

Fishers

0points

0out of 0found this answer helpful.

answer 2

Hi,
A universal bush made of rubber mounted in the bracket fits frame diameters of 28- 40 mm.

The link below takes you to the Hamax safety system guide:

http://www.hamax.com/index.php?option=com_content&view=article&id=136&Itemid=165

Thanks

Staff

answered 8 months ago

EvansCyclesCCCavenOH

-1point

0out of 1found this answer helpful.

Question

Will the Hamax Kiss fit my men's GT Nomad Sport 2005?

I have a men's GT Nomad Sport 2005, which has a slightly unusual arrangement of stays underneath the seat (see photo).

Any ideas if the Hamax Kiss (or any other rear child seats) will still fit?

asked 8 months ago

Anonymous

on Hamax Kiss Child Seat

0points

0out of 0found this question helpful.

2 answers

Answers

answer 1

It just about fits my GT Zaskar. With the clamp positioned as high as possible up to the seat stays the height is just right and there is about 1mm clearance at the socket for each of the bars. My frame is nearly 20 years old though so I'd suggest trying it out, you'll only need to offer up the clamp and it will be obvious if it'll work or not.

answered 18 hours ago

Anonymous

0points

0out of 0found this answer helpful.

answer 2

The Hamax Kiss should be fine as it attaches onto the seat tube section of the frame.

Staff

answered 8 months ago

EvansCyclesCCAndyL

-1point

0out of 1found this answer helpful.

Question

Fitting on the Seat Tube

Hi, Thsi seat bolts to the seat tube but my gear cables also run vertically down the seat tube. Is there a work around or should I look at an alternative product? Thanks

asked 5 months, 3 weeks ago

Anonymous

on Hamax Kiss Child Seat

0points

0out of 0found this question helpful.

2 answers

Answers

answer 1

If the cables run down the back of the seat tube (closest to the rear wheel) then it will be fine as the rear of the clamp is a then metal strap. The bulk of the clamp goes to the front. If the cables run down the front you'll have to find something else.

answered 18 hours ago

Anonymous

0points

0out of 0found this answer helpful.

answer 2

The bracket that mounts to the frame has a very narrow rear section of the bracket, so in most cases there is room to run the cable behind the bracket no problem, except in rare cases where the welded cable stop for the cable is welded right in the place where the bracket needs to be mounted. In the vast majority of cases, the bracket can be mounted above or below this cable stop and still allow the seat to fitted in the correct position. If you are still unsure, please contact your local Evans store, and if they have a seat there they should be able to 'offer it up' to your bike and confirm this 100% for you.

answered 5 months, 3 weeks ago

FisherOutdoorLeisure

0points

0out of 0found this answer helpful.

Question

Will it fit on the top of a rack?

asked 1 week, 6 days ago

Anonymous

on Hamax Kiss Child Seat

0points

0out of 0found this question helpful.

2 answers

Answers

answer 1

No, it fits directly to the seat tube and there isn't space beneath for a rack. You could take the rack off though.

answered 18 hours ago

Anonymous

0points

0out of 0found this answer helpful.

answer 2

This child seat uses its own bracket and will not fit on a pannier rack.

Staff
Social Answering Subscriber

answered 1 day ago

EvansCyclesCCPeterJ

0points

0out of 0found this answer helpful.

Question

Is it for also for infants 10 months old?

asked 1 year, 1 month ago

Anonymous

on Hamax Kiss Child Seat

0points

0out of 0found this question helpful.

1 answer

Answers

answer 1

Hello,

As long as the child can support themselves then these child seat will be fine.

Staff

answered 1 year ago

EvansCyclesCCDanK

+1point

1out of 1found this answer helpful.

Question

1. what is the maximum weight the seat can take? 2. does it come with the fitting bracket? 3. is it quick release?

asked 11 months ago

Anonymous

on Hamax Kiss Child Seat

+2points

2out of 2found this question helpful.

1 answer

Answers

answer 1

The maximum weight for this seat is 22kg. It comes complete with the fitting bracket and standard support bar as shown in the picture which is suitable for most bikes (alternative support bars are also available if required). The support bar is quick release, leaving just leaving the small black mounting bracket on the bicycle frame when you don't need to use the seat.

answered 11 months ago

FisherOutdoorLeisure

+3points

3out of 3found this answer helpful.

Question

hi, will this seat fit the raleigh oakland womens hybrid bike? and if i ordered all this online would it be possible to get it fitted? thanks

asked 11 months ago

Anonymous

on Hamax Kiss Child Seat

0points

0out of 0found this question helpful.

1 answer

Answers

answer 1

Yes, this should fit fine and it can be fitted if you take it to one of our stores.

Staff

answered 11 months ago

EvansCyclesCCAdamM

0points

0out of 0found this answer helpful.

Question

Will a HAMAX Kiss Child seat fit on a Ridgeback Velocity open frame for women?

Looking at the frame I am finding it difficult to figure out where one can attach a child seat bracket. Could you confirm if this model will work for this bike? Can it be fitted to the seat bar? If not possible to fit this seat on one. any other model or make to recommend?
My ridgeback velocity has a rear carrier fitted. Many thanks.

asked 11 months ago

Anonymous

on Hamax Kiss Child Seat

0points

0out of 0found this question helpful.

1 answer

Answers

answer 1

Yes , this will fit your bike , check the link to fitting instructions ,
http://www.hamax.com/index.php?option=com_content&view=article&id=136&Itemid=165

Staff

answered 10 months ago

EvansCyclesCCBobN

0points

0out of 0found this answer helpful.

Question

I have a trek 7210, can your shop fit this seat to my frame?

I am told that I should get a child seat which fits onto a panier, but a friend with a similar bike to mine had one of these fitted to her frame by one of your shops.

Products related to my question

Hamax Kiss Child Seat

(2)

asked 9 months ago

Anonymous

on Hamax Kiss Child Seat

0points

0out of 0found this question helpful.

1 answer

Answers

answer 1

This Child seat can be fitted to your frame with or without a rear rack . We can certainly fit the seat for you at a store , but is very easy to install yourself .

Staff

answered 9 months ago

EvansCyclesCCBobN

0points

0out of 0found this answer helpful.

1 2 next>>