No these cranks do not come with the Bottom Bracket Bearings. These can be purchased seoarently and we have all the diffrent sizes, brands and colours in stock. Hope this helps.

Staff

answered 1 year, 6 months ago

EvansCyclesContent

0points

0out of 0found this answer helpful.

Question

would it fit a wethepeople trust 2011

asked 1 year, 4 months ago

Anonymous

on Primo Hollowbite Crank

0points

0out of 0found this question helpful.

2 answers

Answers

answer 1

hi there, yes, this will fit your wethepeople, but you will need to change your bottom bracket to a 22mm.

Hope this helps.

Robski

Products related to my answer

Eclat CNC Mid BB - 22mm

(7)

answered 1 year, 3 months ago

robski

0points

0out of 0found this answer helpful.

answer 2

Hello,

Yes these cranks will fit this bike, the only thing that you may need to change is the BB.

Staff
Best answer

answered 1 year, 3 months ago

EvansCyclesCCDanK

+1point

1out of 1found this answer helpful.

Question

i need new cranks so here's a few questions. do these fit 25 tooth sprockets?, what size BB do i need to get?, and do i need special pedals for these?

sorry for all the questions, i just really need to know

asked 1 year, 3 months ago

Anonymous

on Primo Hollowbite Crank

0points

0out of 0found this question helpful.

2 answers

Answers

answer 1

Hi there, I am runnig these same cranks at the moment, firstly, they are indestructible.
You can run a 25t sprocket on it perfectly fine, with no hassle, and you will need a 22m bottom brakcet.

Hope this helps.

Robski (BMX Expert)
Wandsworth Store

Best answer

answered 1 year, 3 months ago

robski

+1point

1out of 1found this answer helpful.

answer 2

yes a 25t sprocket will fit fine, a 19mm bottom bracket is needed and no special pedals are needed.

Staff

answered 1 year, 3 months ago

Anonymous

0points

0out of 0found this answer helpful.

Question

do these cranks fit a mid bb

asked 9 months ago

Anonymous

on Primo Hollowbite Crank

0points

0out of 0found this question helpful.

2 answers

Answers

answer 1

Yes they will but the mid bb must have a inner diameter of 22mm.

Best answer
Top 1000 contributor

answered 9 months ago

BenR

0points

0out of 0found this answer helpful.

answer 2

as long as it is 22mm not 19mm then yes, this should be fine

Staff

answered 9 months ago

EvansCyclesCCAdamM

0points

0out of 0found this answer helpful.

Question

Does this come with a BB?

asked 1 year, 1 month ago

Anonymous

on Primo Hollowbite Crank

0points

0out of 0found this question helpful.

1 answer

Answers

answer 1

It comes with the following,
Material:7075 aircraft grade aluminiumCompatibility:LHD and RHDWeight:33.3 oz (w/o BB)Extra Features:22mm Square Hollow Chromoly Spindle

Staff

answered 1 year, 1 month ago

EvansCyclesCCMattH

0points

0out of 0found this answer helpful.

Question

Will i need to change BB?

I bought these cranks i have a fit bike trl1 with 19mm bb what happens if dont cange bb
?

asked 1 year, 1 month ago

Anonymous

on Primo Hollowbite Crank

0points

0out of 0found this question helpful.

1 answer

Answers

answer 1

the axle on the primo crank is 19mm so these will fit straight into your exsisting bb

Staff

answered 1 year ago

Anonymous

0points

0out of 0found this answer helpful.

Question

Would this fit a 2008 kona shred ?

asked 1 year ago

Anonymous

on Primo Hollowbite Crank

0points

0out of 0found this question helpful.

1 answer

Answers

answer 1

they can fit that bike however you would need a 22mm euro bottom bracket and a BMX chaining with 25T or 28T and BMX chain.

Staff

answered 11 months ago

EvansCyclesCCAdamM

0points

0out of 0found this answer helpful.

Question

Do these come in a 19mm bottom bracket?

asked 11 months ago

Anonymous

on Primo Hollowbite Crank

0points

0out of 0found this question helpful.

1 answer

Answers

answer 1

They are only available in the 22mm size

Staff

answered 11 months ago

EvansCyclesCCPatrickW

+1point

1out of 1found this answer helpful.

Question

I have been recommended these for a felt base 2009 bmx, it currently has a 1 piece crankset so when I buy these would I need a new sprocket aswell?

would I need a new sprocket or can the spindle from this go straight through the sprocket even though it's currently a one piece crank set?

asked 7 months ago

Anonymous

on Primo Hollowbite Crank

0points

0out of 0found this question helpful.

1 answer

Answers

answer 1

You will need to buy a new front sprocket

Staff

answered 7 months ago

EvansCyclesCCDaveJ

0points

0out of 0found this answer helpful.

Question

can I fit 9/16 pedals on these?

asked 7 months ago

Anonymous

on Primo Hollowbite Crank

0points

0out of 0found this question helpful.

1 answer

Answers

answer 1

9/16" pedals can be fitted to this crankset.

Staff

answered 7 months ago

EvansCyclesCCBenL

0points

0out of 0found this answer helpful.

1 2 next>>