Answering your cycling questions

Any standard pedals can be fitted to these cranks. see a few suggestions below

BMX Bottom Brackets (BB) come in 3 sizes; Mid, Euro or US.
Your BMX will have a BB shell in one of these sizes, and will need a matching BB to fit 3 piece cranks.

As long as the BMX you are fitting it to has a Mid sized BB, then yes.

A Bottom Bracket are the Bearings that the crank spindle goes through that enables the cranks to spin. There are two main sizes at the moment, Mid and Spanish. A few BMX’s have different sizes, some budget/older bikes have the old US bottom bracket size, and racing BMX’s have Euro bottom brackets, but for the most part freestyle bikes will have either Mid or Spanish.

Hello,

These cranks will fit but the bottom bracket thats comes withem will not, please see the link below for the correct set

http://www.evanscycles.com/products... cranks

They will fit, but you will need to buy a sealed mid bottom bracket to fit the crank.

packaged, this three piece set weighs 1.3kg / 3lb.

yes these will fit on the we the people arcade, these are not the same as the cranks that come on the arcade. as long as you dont land hard from abig stair gap then these cranks should take up to your abuse

These will only fit your Subject if you change the BB over (which is included) But other than that, there should be no problem. If you are unsure of anything, your local Evans branch can help you with your planned conversion.

This will fit as long as your bottom bracket is 19mm you will also need to make sure your sprocket is the correct fitment. (one bolt to fix it to the crank arm).